中国科学院光电技术研究所的自适应光学研究进展

中国科学院光电技术研究所的自适应光学研究始于1979年。1980年建立自适应光学研究室,在突破了波前校正器(包括变形反射镜和高速倾斜反射镜)、波前传感器、波前处理机和波前控制等关键技术的基础上,研制了一系列自适应光学系统,用于天文望远镜、惯性约束聚变和人眼视觉研究等。     

Solving nonlinear Schrödinger equation based on discrete split-step multi-wavelet method

In this paper, the discrete split-step multi-wavelet method (DSSMWM) is used to solve nonlinear Schrödinger equation. When the relative amplitude error is below10⁻³magnitude, relative error of amplitude evolution, relative error of pulse broadening ratio, relative phase error, and computing time is respectively achieved. Because multi-wavelet is extraordinary effective for data compression, it only needs to deal with very little data. It can be seen that although the relative amplitude error, relative error of amplitude evolution, relative error of pulse broadening rate and relative phase error changes little, but the computing time are greatly reduced.     

Interface and its effect on the interlaminate shear strength of novel glass fiber/hyperbranched polysiloxane modified maleimide-triazine resin composites

Interface is the key topic of developing advanced fiber reinforced polymeric composites. Novel advanced glass woven fabric (GF) reinforced composites, coded as GF/mBT, were prepared, of which the matrix resin was hyperbranched polysiloxane (HBPSi) modified maleimide-triazine (mBT) resin. The influence of the composition of the matrix on the interfacial nature of the GF/mBT composites were studied and compared with that of the composite based on GF and BT resin using contact angle, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and dielectric properties over wide frequency and temperature ranges. Results show that the interfacial nature of the composites is dependent on the chemistries of the matrices, mBT matrices have better interfacial adhesion with GF than BT resin owing to the formation of chemical and hydrogen bonds between mBT resin and GF; while in the case of mBT resins, the content of HBPSi also plays an important role on the interfacial feature and thus the macro-performance. Specifically, with increasing the content of HBPSi in the matrix, the interlaminate shear strength of corresponding composites significantly improves, demonstrating that better interfacial adhesion guarantees outstanding integrated properties of the resultant composites.     

放大自发辐射对激光冲击处理7050铝合金的影响

 利用高功率钕玻璃激光器对7050铝合金表面进行了冲击处理,保持泵浦功率不变,用压电传感器和示波器测试了激光冲击产生的压力波形,用X射线应力测量仪测量了激光冲击后铝合金表面的残余应力,并用非接触式光学轮廓仪分析了激光冲击后铝合金的表面形貌,研究了放大自发辐射强度对激光冲击处理7050铝合金冲击压力、残余应力和粗糙度影响的微观机理。研究结果表明:在泵浦功率不变前提下,放大自发辐射强度的增大降低了激光冲击波压力,铝合金表面残余压应力也随之降低,同时铝合金表面粗糙度增大。     

Adaptive synthesis of optical pattern for photonic crystal lithography

The two-photon absorption spectrum and cross-section (δ) for ruby (Cr³⁺:sapphire) have been measured over the 0.8–1.2 μm wavelength range at 25°C. Absolute values of δ were obtained by comparing the fluorescence yield for two-photon excitation with that for single-photon excitation of the same ionic transition under identical illumination conditions. The maximum values of δ are 4.6×10⁻³ GM for o-polarisation and 5.9×10⁻³ GM for e-polarisation at 840 nm. The relevance of these measurements to distributed optical fibre sensing is briefly discussed.     

双参数分岔平面内胰腺β细胞的簇放电分析

胰岛分泌胰岛素的放电活动以动作电位的簇放电为主要特点.文章考虑具有代表性且较为简单的Vries-Sherman模型,通过其快子系统的双参数分岔分析确定了双参数平面内不同簇放电类型的存在区域,并应用快慢动力学分析研究了参数v_m取不同值时所产生的簇放电模式的拓扑类型以及它们之间相互转迁的动力学机理. 关键词： 簇放电 快慢动力学 余维-2分岔     

具有宽调谐范围的微纳光机电系统可调谐垂直腔面发射激光器研究

基于微纳机械技术设计得到了可调谐垂直腔面发射激光器结构,将具有Al_0.8Ga_0.2As牺牲层结构的DBR反射镜制备成微纳光机电系统,并与多量子阱有源区光纵向耦合结构相结合.其中,微纳光机电DBR结构不再是简单的分布布拉格反射镜,而是对光波具有高调制作用的可动微纳机械反射镜系统,并在静电力作用下可以动态调谐VCSEL谐振腔的激射波长.实验结果显示,当激光器调谐电压从0 V增加到7 V时,对应激射波长将从968.8 nm蓝移到950 nm,整个调谐范围达到了18.8 关键词： 垂直腔面发射激光器 微纳光机械 波长可调谐     

BRIF and CARIF progress

China Institute of Atomic Energy (CIAE) is currently constructing Beijing rare ion beam facility (BRIF) and is proposing China advanced rare ion beam facility (CARIF). This paper is aiming at introducing the progress of BRIF project and the conceptual design CARIF. The ISOL type facility BRIF under construction is composed of a 100 MeV 300 μA proton cyclotron, an ISOL with mass resolution of 20000, and a super-conducting LINAC of 2 MeV/q, and will be commissioned in 2013. CARIF facility proposed is planned to use both ISOL and PF techniques. It is based on a China advanced research reactor CARR that was critical, with ISOL separation of fission fragment, post acceleration to 150 MeV/u, and fragmentation of neutron-rich fission fragment beam like ¹³²Sn. Such unique combination will allow CARIF to deliver beam intensity better than the best world facilities by more than one order of magnitude.     

The design and construction of a pulsed beam generation system based on high intensity cyclotron

In order to perform the studies on a pulsed beam generation system based on a high intensity cyclotron, a test beam line with a pulsed beam generation for a 10 MeV compact cyclotron (CYCIAE-10) has been designed and constructed at China Institute of Atomic Energy (CIAE). A 70 MHz continuous H-beam can be pulsed to the pulse length of less than 10 ns with a repetition rate of 4.4 MHz. The sine waveform with a frequency of 2.2 MHz is adopted for the chopper and a mesh structure with single drift and dual gaps is used for the 70 MHz buncher. A helical resonator is designed and constructed based on simulations and experiments on the RF matching for the chopper. A helical inductance loop that is exceptionally large of its kind and equipped with water cooling for the resonator has been successfully wound and a 500 W solid RF amplifier has been manufactured. A special measuring device has been designed, which can be used to measure both the DC beam and the pulsed beam. The required pulsed beam was obtained after pulsed beam tuning.     

Minimization of artifact protein aggregation using tetradecyl sulfate and hexadecyl sulfate in capillary gel electrophoresis under reducing conditions

In the biopharmaceutical industry, CE-SDS assesses the purity, heterogeneity, and stability of therapeutic proteins. However, for mAb-1 and mAb-2, typical CE-SDS under reducing conditions produced atypical protein peak profiles, which led to biased purity results, thus were not acceptable for biologics manufacturing. This bias was caused by the formation of method-induced higher molecular weight artifacts, the levels of which correlated with protein concentration. Here we show that adding sodium tetradecyl and hexadecyl sulfates to the sample and the sieving gel buffer solutions was required to prevent formation of aggregate artifacts and to maintain detergent:protein uniformity, suggesting their importance during the sample preparation steps of heat denaturation and subsequent cooling as well as during capillary migration. For these proteins, we show that this uniformity was likely due to the ability of these detergents to bind proteins with markedly higher affinities compared to SDS. “CE-SC_XS” methods (where CE-SC_XS is CGE using detergent composed of a sodium sulfate head group and a hydrocarbon tail, with “C_X” representing various tail lengths), were developed with a sodium tetradecyl sulfate sample buffer and a sodium hexadecyl sulfate containing sieving gel buffer that minimized artifacts and provided robust characterization and release results for mAb-1 and mAb-2.